Process equipment skids

Pressure vessels / Spherical tanks

Heat exchangers

Storage tanks

Special piping products and

FIBERBOND® FRP piping system

Built on a 12-acre of land and located at about 17 km upstream of the mouth of Langat River, which is in the proximity of major ports such as Westport and Northport. The workshop is accessible by river.

Production facilities include one workshop ( 75m long x 22m wide x 13m high ), cabin offices, perimeter fencing with guardhouse, open storage yard and open fabrication area.

Production capacity for maximum output of vessels, structures, pipings is approximately 400 metric tons per month on a single shift with potential to increase to 1000 metric ton.

The Banting yard, being accessible by the river via a private jetty, gives it a distinct advantage. It is able to manufacture large equipment, such as pressure vessels and equipment modules that are too large to be transported overland but easily loaded on and transported by barge via the river to any designated port.

Built on a 2.5-acre site within the Tebrau Industrial Estate at Johor Bahru. This yard facility is 25km from the 2nd-link crossing and 16km from the causeway to Singapore and its port. It is connected via the Pasir Gudang highway to the Tanjong Pelepas Port and the Johor Port.

Production facilities include two workshop bays, each 90m long x 18m wide x 10.5m high. An additional paved area of 4,000 m² is available for open fabrication, lay-down and other purposes.

Production capacity for maximum output of vessels, structures, pipings is approximately 250 tons per month on a single shift.

The yard has been granted the Licensed Manufacturing Warehouse ( LMW ) status by the Malaysian government. This status enables us to increase its production capacity for the manufacture of process equipment for the overseas market.

Built on a 2.5 acre ( 10,057 m² ) piece of land located strategically in the Jubail Industrial City.

Production facilities include covered workshop of 125 m long x 20 m wide x 12 m high ( area of 2,500 sq m ) with an open lay-down & fabrication yard of 7,500 m^2.

The yard also has a cleaning L-shape bay with lengths of 15 m x 15 m and width of 7 m.

Sits on a 10.8-acres ( 43,700 m² ) site fronting the Kuantan-Terengganu main trunk road and is within close proximity to the Kertih Integrated Petroleum Complex.

Production facilities include two bays of fabrication workshops with a total area of 2550 m², one mechanical workshop of 300 m², one covered warehouse of 430 m² and an office building of 300 m². An additional paved area of approximately 30,000 m² is available for open fabrication, lay-down and other purposes.

Production capacity for maximum output of vessels, structures, pipings is approximately 250 tons per month on a single shift.

Built on a 5.4-acre ( 22,000 m² ) site within the Nilai Industrial Zone in Negeri Sembilan.

Production facilities include two workshop bays, each 92m long x 18m wide x 13m high, a warehouse, an office building and a paved area of 9,300 m² which may be used for open fabrication, lay-down and other purposes.

Production capacity for maximum output of vessels, structures, pipings is approximately 400 metric tons per month on a single shift.

Houses the manufacturing facilities of FIBERBOND® FRP pipe products.

This yard was given the much sought-after status of LMW granted by the Malaysian government. This status allows exemption of import duties for various types of imported raw materials as well as sales taxes on products designated for export.

Thus we are able to offer high quality products to overseas customers at competitive prices.